Construction | |||
interiorem conductor | materia | lenis aeris tube | |
dia. | 9.30±0.10 mm | ||
Nulla | materia | corporaliter spumans PE * | |
dia. | 22.40±0.40 mm | ||
exterioris conductor | materia | anulus limae aeris | |
diametri | 25.60±0.30 mm | ||
iaccam | materia | PE vel ignis retardat PE | |
diametri | 27.90±0.20 mm | ||
mechanica proprietatibus | |||
curvus radii | una repetita movens | 127 mm 254 mm 500 mm | |
trahens vires | 1590 N | ||
contundito resistentia | 1.4 kg/mm | ||
commendatur temperatus | PE jacket | copia | -70±85°C |
institutionem | -40±60°C | ||
operatio | -55±85°C | ||
ignis retardat PE jacket | copia | -30±80°C | |
institutionem | -25±60°C | ||
operatio | -30±80°C | ||
proprietatibus electrica | |||
impedimentum | 50±2 Ω | ||
capacitas | 75 pF/m | ||
inductionem | 0.19 uH/m | ||
propagationis velocitas | 87% | ||
DC naufragii voltage | 6.0 kV | ||
Nulla resistentia | >5000 MQ.km | ||
apicem potestatem | 91 kW | ||
protegendo attenuatione | >120 dB | ||
abscise frequency | 5.0 GHz | ||
attenuatio et mediocris potentia | |||
frequentia, MHz | power rate@40°C,kW | nom.attenuation@20°C,dB/100m | |
200 | 5.05 | 1.67 | |
450 | 3.29 | 2.55 | |
800 | 2.42 | 3.48 | |
900 | 2.26 | 3.7 | |
1000 | 2.14 | 3.93 | |
1800 | 1.54 | 5.44 | |
2000 | 1.46 | 5.77 | |
MMCC | 1.38 | 6.09 | |
2500 | 1.28 | 6.55 | |
3000 | 1.15 | 7.27 | |
maximum valorem attenuatio potest esse 105% valoris nominalis attenuaiton. | |||
VSWR | |||
690-960MHz | ≤1.12 | ||
1700-2200MHz | ≤1.15 | ||
2300-2400MHz | ≤1.15 | ||
signa | |||
2011/65/EU | facilis | ||
IEC61196.1-205 | facilis |
RF Connector
Exemplar: TEL-4310F.12-RFC
Descriptio
4.3-10 Male connector pro 1/2″ flexibilis RF cable
Materia et Plating | |
Centrum contactum | Aes / Argentum Plating |
Insulator | PTFE |
Corpus & Exterior Conductor | Aes / mixtura patella cum tri-stannum |
Gasket | Pii Purgamentum |
Characteres electrici | |
Impedimentum characterum | 50 Ohm |
Frequentia Range | DC~3 GHz |
Nulla Resistentia | ≥5000MΩ |
Dieelectrica Fortitudo | ≥2500 V rms |
Centrum contactum resistentia | ≤1.0 mΩ |
Exteriore contactu resistentia | ≤1.0 mΩ |
Damnum insertio | ≤0.1dB@3GHz |
VSWR | ≤1.1@-3.0GHz |
Temperatus range | -40~85℃ |
PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
IMPERVIUS | IP67 |
Instructiones instruitur N vel 7/16 vel 4310 1 / 2″ super funem flexibilem
Structura connectoris: (Fig1)
A. fronte nut
B. retro nut
C. gasket
Dimensiones ablatae ut ex icone ( Fig2 ) ostenduntur , ratio habenda est denudando ;
1. Finis superficies conductoris interioris hamari debet.
2. Impultitiam remove ut squamam aeris et lappa in extremitate funis.
Pars obsignatio: Screw obsignatio in una cum conductore exterioris funis ut in schemate ostenditur (Fig3).
nucem dorso posito (Fig3).
Ante et retro nucem miscere futuit ut patet per diagram (Figs(5)
1. Ante voltum, lavacrum lubricandi uncto in o-anulo lini.
2. Nux et funem inmotam retinete tergum, Screw in testudinis corpus in dorsum testudinis corporis.Screw principale testudinis corpus corticis dorsi corporis utens simia detorquent.Consummatum est coagmentatio.