2″ Super flexibile thorax funis DIN 7/16 DIN 7/16 3M
Locum applicandi funibus satietatis cum instrumento 8TS et antennae, quae necessariae sunt additis IMPERVIUS mensuris, ut IMPERVIUS gel vel taeniola, occurrit IMPERVIUS vexillum IP68.
Vexillum longitudinum: 0.5m, 1m, 1.5m, 2m, 3m, mos speciales requisita in longitudinem lanei satiari potuit.
Characteres & Applications
| Electrical Spec. | |
| Vswr | ≤ 1.15 (800MHz-3GHz) |
| Dielectric resistens voltage | ≥2500V |
| Dielectric resistentia | ≥5000MΩ(500V DC) |
| Pim3 | ≤ -155dBc@2 x 20W |
| Operating Temperature | - 55oC ~ + 85oC |
| damnum inserta | Pendet leghth funis |
| Weatherproofing vexillum | IP68 |
| Cable longitudo | nativus |
| Jacket | Iniectio corona |
| Connector applicabiles | N/DIN Type |
Structura et perficiendi parametri
| 1/2" RF Cable | RF Connector | |||
| Materia | Interiorem conductor | Filum aluminii aeneum vestitum (Φ4.8mm) | Interiorem conductor | aes, phosphorus aes, saxum, crassum ≥3μm |
| Dielectrica materia | Corporalis spuma polyethylene (Φ12.3mm) | Dielectrica materia | PTFE | |
| Exterior conductor | Tubus aeneus corruptus (Φ13.8mm) | Exterior conductor | aes, tri-mixtura patella, crassitudo≥2μm | |
| Jacket | PE/PVC(Φ15.7mm) | Nucis | aes, ni patella, crassitudo ≥3m . | |
| signantes anulum | Silicone rubber | |||
| Electrical and Mechanical Spec. | Impedimentum proprium | 50Ω | Impedimentum proprium | 50Ω |
| Vswr | ≤ 1.15(DC-3GHz) | Vswr | ≤ 1.15(DC-3GHz) | |
| Vexillum capacitatis | 75.8 pF/m | Frequentia | DC-3GHz | |
| Velocitas | 88% | Dielectric resistens voltage | ≥4000V | |
| Attenuation | ≥120dB | Contactus resistentia | Interiorem conductor ≤ 5.0mΩ Exterior conductor≤ 2.5mΩ | |
| Nulla resistentia | ≥5000MΩ | Dielectric resistentia | ≥5000MΩ, 500V DC | |
| Apicem voltage | 1.6KV | Diuturnitatem | ≥500 | |
| Apicem Power | 40KW | Pims | ≤ -155dBc@2x20W | |
stipare Reference
Instructiones instruitur N vel 7/16 vel 4310 1 / 2″ super funem flexibilem
Structura connectoris: (Fig1)
A. fronte nut
B. retro nut
C. gasket
Dimensiones ablatae ut ex icone ( Fig2 ) ostenduntur , ratio habenda est denudando ;
1. Finis superficies conductoris interioris hamari debet.
2. Impultitiam remove ut squamam aeris et lappa in extremitate funis.
Pars obsignatio: Screw obsignatio in una cum conductore exterioris funis ut in schemate ostenditur (Fig3).
nucem dorso posito (Fig3).
Ante et retro nucem miscere futuit ut patet per diagram (Figs(5)
1. Ante voltum, lavacrum lubricandi uncto in o-anulo lini.
2. Nux et funem inmotam retinete tergum, Screw in testudinis corpus in dorsum testudinis corporis.Screw principale testudinis corpus corticis dorsi corporis utens simia detorquent.Consummatum est coagmentatio.
